Enhanced Visibility Action Back Coverall

Garment Details:

• Fabric: 7.25 oz. Twill
• Blend: 65% Polyester / 35% Combed Cotton
• Finish: Pre-cure durable press with soil release
• Closure: Two-way brass zipper, gripper at top and at lapel
• Collar: One-piece topstitched
• Pocket: Two set-in front pockets, two patch hip pockets, two breast pockets, rule pocket
• Back: Action back pleats offer additional room across the back for easy movement and range of motion.
• Care: Industrial, Light Soil and Home Wash
• Four-needle band joins top and bottom
• Safety-stitched outseams, felled inseams
• Side vent openings
• Sized to be worn over clothes
• 2 1/2" yellow/silver/yellow enhanced visibility trim applied down both arms, all around body below pockets, across back and two stripes around thighs
• Does NOT comply with ANSI/ISEA 107-2015
• Manufactured by Red Kap

Price Note:

• Sizes 52 and larger are higher in price
• Embroidery available at additional cost

Size Recommendation:

• We recommend that you measure the largest part of the torso by inches and add 2 inches. This will allow room for movement.
• If you are layering clothing underneath, you may want to go with a larger size to allow for more space.
• The sizing will match exactly as you order. So 40 inches will be exactly 40 inches around when coverall is closed.

Enhanced Visibility:

Enhanced Visibility is NOT the same as High Visibility. The term enhanced visibility can be used for any garment of any color that has retro-reflective striping added to it in any configuration. These garments are not typically ANSI compliant and are for workers in lower risk environments. These workers can still benefit from the extra security of heightened visibility in low light conditions.